HOW TO CRACK ANY 4G AND 3G MIFI / WIFI DEVICE LIKE SMILE, SPECTRANET, GLO,AIRTEL,MTN,9MOBILE FOR FREE

Following this tutorial could mess up Your device for good. You are to follow this tutorial at your own risk. I would try to help where I can but I will Not Be Held Responsible for any problem that may occur by following this or any tutorial on this Blog. Kindly note that, this is for educational purpose only! and you are not advised to try since I do not know if Unlocking the device in Your country is legal or not.
There are different versions for this Boost Even M028T device and I am only going to write on L02B and L02C with 17 XXX (As Described by Droid Mobi).
For those using the Busy 4G You will notice the difference in the change in design of the device

The First one is basically an L02B and Second L02C 17 XXX.
Requirements:
1. Download these files Here:
WTPTP.zip (Download Here )
LTE_MIFI_Generic_Driver.zip (Download Here )
L02B_M028T_vodafone_Cameroun.zip (Download Here )
L02BUganda1_M023_LCD_V003_8801_2.144.000
_20161117_1030_SIGN.zip (Download Here )
L02HSUN1_FXPR2_M028T_V003_8801_2.137.001
_20160513_1130.zip (Download Here )
2. Password: Here (Crack12345)

3. Attention
INSTALLATION OF DRIVERS TO PROCEED:
1. Unzip the WTPTP file in the downloaded file.
2. Go into the folder and run either files… The x64 is for 64-bit OS and the other is for 32-bit OS.
3. Click on install to install or update the drive

4. Go back to the Folder and unzip the “LTE_MIFI_GENERIC_DRIVER”.
5. Press on the Windows Key and search for Device manager (Or follow any short cut you know to get to device manager).
6. Select the First Item and click on “Action” on the Menu.

7. Click on “Add legacy device”.
8. Select ” Install the hardware that I manually select from a list (Advance) ” and click Next.

9. Click “Have Disk” then Browser. Locate and select the ” LTE MIFI Generic” folder.

 

10. Windows 7 and above would automatically select the file with 7 to it… Click on next and start the installation.
11. After Installation Success, Check the Ports Section in the Device manager list, you should see “Marvel AT Interface (COM)”.

SO, LET’S PROCEED TO THE UNLOCKING STEPS SINCE WE HAVE NOW INSTALLED THE DRIVERS SUCCESSFULLY. (FIRST TYPE / M028T L02B – LONG METHOD, RECOMMENDED BUT A LITTLE BIT CUMBERSOME)

 

STEP 1

VIEW

Take out the battery from the device and don’t connect till You click on a flash icon. Disconnect on every successful run.
You can skip this if you wish to… But would be safer not to skip.

STEP 2

VIEW

Unzip the Uganda file

STEP 3

VIEW

Run the SW Downloader File


STEP 4

VIEW

Click on the File Icon to browse for the Firmware

STEP 5

VIEW

Select the SW Downloader File in the SWD Folder

STEP 6

VIEW

Check All the box and Check “erase and flash’ in options on the menu

STEP 7

VIEW

Click on the Green Bulb icon to start flashing

STEP 8

VIEW

At this point, stop anything & pay attention carefully. Disconnect device as soon as you see “Erase All Flash Done”


STEP 9

VIEW

Unzip the “L02HSUNXXX” File and run the SW Downloader file in there.

STEP 10

VIEW

Follow Similar processes as the first, click on flash (green bulb) then connect device without battery. Let it flash to the end with this one.

STEP 11

VIEW

This would be similar on success.

STEP 12

VIEW

Unzip the “L02b M028T Vodafone Cameroon” file and follow as the others

STEP 13

VIEW

Allow it to run till the end to successfully flash the new Firmware

STEP 14

VIEW

Now insert a Sim from different Network and power on

STEP 15

VIEW

There Device SSID should be “SMARTBRO” Connect either via Wi-Fi or With USB cable and go to this address in browser 192.168.1.1

STEP 16

VIEW

Device Unlock code is 123456

STEP 17

VIEW

Please wait whiles device to loads…

STEP 18

VIEW

IMEI and Mac should be intact

FINALLY,
Network and firmware should be intact as well. HURAY your device is now unlocked.
All Done You can now unlock your Busy MIFI M028T or Shanghai Boot Even MIFI M028t all Variance For free.
Credit goes to Droid Peeps and His team for this Tut.
Extended and modified By CodeView Technologies
Do not forget to share & subscribe to our social media channels for more great tutorials
Cheers!